If you have a Bosch dishwasher that keeps showing an e24 error code, you are not alone. The problem is often caused by the control module, which is the electronic device that controls the machine. This malfunction can disrupt the dishwasher’s ability to properly drain water. Contacting a Bosch service technician will help you determine the best course of action. But in many cases, there’s no quick fix. Here’s what to do in such a case.
The first step in troubleshooting a Bosch dishwasher with an E24 error code is to turn off the machine. If the unit is powered on, a blockage may be causing the problem. If the issue persists, you can unplug the machine and clear the blockage using a paper clip. Be sure to check the unit thoroughly before turning it back on, as you may have to disassemble it.
Next, the dishwasher will attempt to check the amount of water in the wash water tank by running the drain pump and wash pump. If it detects too much water in the tank, it will try to drain it again. If the water level is too high, the machine will continue to throw the E24 error code. In some cases, however, a dishwasher can skip the water check altogether by opening the door during stage three and closing it again.
The E24 error code in a Bosch dishwasher is a warning that something is clogging the drain. The manufacturer says the error occurs if the drain hose is bent or obstructed. However, user reviews are mixed. Whether or not this is the cause of the error, cleaning the drain hose and straightening the hose will solve the problem. The first step in troubleshooting a Bosch dishwasher is to locate the problem.
If these two steps do not work, you can remove the drain pump cover. If it is loose, it may be causing the E24 error. Remove the drain pump cover and check for blockages in the drain hose. You can also check the pump impeller if you’re able to see it. Lastly, remove the kick plate and inspect the control board. If this doesn’t work, call a technician.
If this still doesn’t solve the problem, you can check the drain hose for blockages. It should be connected to the garbage disposal or the S trap. Unplug the drain hose and inspect it for any blockages. If all else fails, you can check the drain hose for a blockage. If the drain hose is not obstructed, it could cause the E24 error.
Another simple way to fix an E24 error in a Bosch dishwasher is to unplug the unit. Some machines have a control panel where you can reset the machine, while others have a “Drain” or “Cancel” button. Pressing the button can prevent the machine from completing its operation. Otherwise, you may need to contact Bosch service for assistance. If none of these methods work, it’s worth trying a vinegar and baking soda solution.